Stone restoration is a process that can breathe new life into your stone surfaces. It can also help to protect them from further damage. If you are thinking about having your stone surfaces restored, it is important to learn as much as you can about the process. In this blog post, we will discuss 10 facts about stone restoration that every homeowner should know!
Cracked stone needs to be restored right away
Cracked stone is one of the most common problems for homeowners. Whether it’s a simple crack that can be patched with mortar or a large fissure that requires full restoration, it’s important to restore cracked stone right away. As you read on, you will discover what causes cracked stone and why it needs to be fixed as soon as possible.
- Cracked stone is often caused by rapid temperature changes in the weather—especially if they happen during winter months when your home is colder than outside temperatures, which can cause water inside the house to freeze and expand. This expansion can lead to cracks forming in your exterior walls or any other area where you have stones installed in your home.* This problem can be prevented by keeping an eye out for signs of damage early on so that repairs can begin before cracks become too big.* If left untreated, these large holes will continue expanding until eventually breaking apart completely!
Other Natural Stone like Marble, granite and slate are more vulnerable to acid exposure than other stones
If you’re dealing with damaged marble, granite or slate, it’s likely that the damage has been caused by an acidic beverage. Acidic foods and drinks can cause damage to these stones as well as other stone surfaces. It’s also worth noting that acidic foods and drinks can cause damage to metal surfaces as well.
Natural stone floors, countertops can chip or break if you’re not careful
If you have natural stone floors, countertops, make sure that you use them with care. Natural stones are more fragile than man-made floors or countertops and can chip or break if they are not handled properly.
Here are some tips for keeping your natural stone looking great:
- Use coasters when you are drinking hot liquids to protect the surface from heat damage.
- Don’t use sharp objects like scissors or knives on the stone because this could cause damage as well.
- Don’t use abrasive cleaners on your counters; always choose products specifically designed for natural stone surfaces.
- Don’t leave hot pans sitting on top of the surface because it can burn the finish off and leave marks that will show through later on in life (and repair is usually not covered by insurance policies). If possible, place pans under coolers or other heat insulators before storing them away after cooking so that no residual heat remains near where people will be sitting around eating meals every day! It may take some time but eventually these dirty tile stains will fade away completely if left alone long enough… hopefully?
Grout is porous, so it should be sealed regularly
Another thing you should know about grout surfaces is that it’s porous. This means that grout can absorb stains from dirty shoes, pets and other substances. To keep your grout looking fresh and clean, you should seal it with a clear sealer on a regular basis.
Never use vinegar on natural stone
Vinegar is one of the most common household cleaners, but it should never be used on natural stone. Vinegar is very acidic and can damage stone. It can remove sealer and etch the stone. Instead, use a mild detergent such as dishwashing liquid or hand soap to clean your natural stone surfaces. Use a soft cloth and warm water to wipe down the surface of your stones, paying special attention to areas where buildup occurs (such as the bottom of your sink). Make sure that you do not use abrasive cleaners or steel wool on your natural stone surfaces because these will scratch them up!
Don’t scrub the stone too hard when you’re deep cleaning
When cleaning the stones on your property, it is important to scrub them gently. Don’t use a steel brush or anything abrasive that may scratch the stone. Also avoid using chemicals or harsh cleansers on your stone walls. If you want to clean it with water, make sure the water is warm as cold water can cause mortar joints to crack and break off pieces of the stone wall when they freeze again after being wetted down.
For more information about how to best care for your stonework, contact All Florida Seal.
Stone restoration can help you avoid the expense of replacing your fixtures
Stone restoration costs less and takes less time than replacing your stone.
With the process of stone restoration, you are opting to fix the stone instead of replacing it with new material. The cost of this option will typically be lower than buying new fixtures, and it can also be completed more quickly. This means that you don’t have to spend as much money on labor or wait for contractors to finish their work before you can move back into your home. In addition, repairing damaged fixtures has a smaller impact on your home’s resale value than removing them entirely
Stained or chipped stone can decrease the value of your property
If you are a homeowner, it is important to know that stained or chipped stone can decrease the value of your property. The good news is that stone restoration is an investment and can be done while you are away on vacation or at work.
Stone restoration services can help make your home look like new again by taking care of any staining and chipping issues that may occur during the building process. Stone restoration services will also take care of cracks in walls so that customers do not have to worry about their homes looking worn down over time.
Natural stone surfaces naturally scratch easily
- Natural stone surfaces naturally scratch easily.
- Scratches are not only unsightly, but they can also harbor dirt and bacteria that can cause health problems.
- You should seal your stone surface regularly to prevent scratches, as well as keep it clean with regular cleaning and maintenance.
When a professional restores your stone, they may choose to hone or polish it as well
When a professional restores your stone, they may choose to honed finish or polish it as well. This is the grit level of the sandpaper used on the surface of your stone.
Hone is for removing scratches, while polishing is better for stains. Hone is better suited to natural stone because it’s less aggressive than polish and will not smooth out or remove too much material from your tile or countertop. Polishing on the other hand removes stains but isn’t ideal if you have fine grained marble or granite with intricate details because this process can easily damage these features.
A professional will get your stone looking its best again in no time
In no time at all, a professional will get your stone looking its best again. They can restore it to its original beauty and help you choose the best stone restoration products and methods for your home.
A professional stone restoration expert will make sure that your home gets the proper care and attention it deserves. With their expertise, they’ll be able to tell you what type of stonework is needed for each area in your property. From there, they’ll work with you to find the right products & methods that will work best for each area of concern so that specific project can be completed as efficiently as possible.
All Florida Seal is a family-owned company that provides concrete paver and natural stone cleaning and sealing services to commercial and residential customers in the Fort Lauderdale area.
If you want to keep your stone looking good for years to come, it’s important to follow these tips and hire a professional whenever possible. You can always learn more about the process of stone restoration by talking with someone like us who has experience in the field. I promise that it will be well worth your time!