You are currently viewing 5 Tips to Get the Most Out of Your Residential Driveway Sealing

5 Tips to Get the Most Out of Your Residential Driveway Sealing

If you’re looking for a “residential near me”, there are a few things you’ll want to keep in mind. The most important thing is that a driveway isn’t as simple as just applying some sealant to the surface and walking away. In fact, it’s pretty much impossible for anyone who isn’t an expert in the field of pavement maintenance to do this right on their own—and even then, it’s not always easy! There are a lot of different factors that go into every job, including proper timing and preparation. In this blog post we’ll go over some best practices for getting the most out of your next residential driveway sealing job:

Make Sure Your Driveway is Clean

  • Make sure your driveway is clean. Remove any loose dirt, debris, and leaves. Use a broom to sweep away any loose dirt and use a leaf blower to remove any leaves. Then use a pressure washer to remove any dirt, debris or oil that may have accumulated on your driveway over time. Once this is done you should use a squeegee to remove all of the water from the surface of your driveway before performing residential driveway sealing.
pressure-washing-residential-driveway

Power Wash Your Driveway

  • Clean your driveway with a high-pressure nozzle.
  • After cleaning, take the time to let your driveway dry completely before you start sealing it. Power washing a wet surface will cause the sealer to dissolve and flake off within weeks of application.

Fill Cracks and Holes

  • Fill cracks and holes.
  • Use a sealant.
  • Use a crack filler.
  • Use a concrete filler.
  • Use driveway crack sealer or repair kit
crack-residential-driveway

Apply Sealer in Proper Conditions

The first thing to know is that sealer should be applied when the temperature is 50 degrees or warmer. This is because cold temperatures can cause a sealer to crack. It’s also wise to consider what type of weather you’ll be applying it in, as some are better suited for dry weather and others for wet ones.

Before performing residential driveway sealing, make sure that your driveway surface is free from debris, dirt and moisture so that the sealer will adhere properly and be less likely to fade over time.

Use a Pavement Roller

A pavement roller is a nearly essential tool for applying sealant. It’s basically a large, hard-plastic drum with a handle attached that you roll over the surface of your driveway to spread out the sealer and ensure it penetrates deeply into the pores of the concrete. The good news is that it’s not complicated to use; all you need to do is read your manufacturer’s instructions carefully, make sure your roller has enough pressure applied when rolling over the sealer (and don’t forget to wear gloves!), and then work on getting an even coat across as much of your driveway as possible with each pass until it’s done!

The benefits of using this tool are significant: by spreading out and smoothing over any unevenness or low spots in your driveway surface before rolling on fresh sealant, you’ll be able to greatly improve both its appearance and longevity by preventing cracking from occurring so easily. In fact, many experts recommend leaving at least 12 hours between driving over newly-sealed concrete surfaces so that every bit of moisture can evaporate—this reduces the risk of potholes forming later on down the road as well!

If you’re looking to seal your driveway, these are some of the best ways to make sure you’re doing it right.

Now that you know how to clean your driveway, it’s time to perform residential driveway sealing. Here are five steps to make sure you apply the sealer correctly:

  • Make sure the weather conditions are right. The best time of year is early spring or late fall when temperatures are in the mid-50s and high 60s (Fahrenheit). Sealing in colder weather can cause a lot of cracks and divots because water won’t be able to escape from under the surface of your driveway as quickly. If you live in an area where there is a large amount of snowfall, wait until after all snow has melted before sealing.
  • Use a power washer if possible. This will help remove any remaining dirt or debris from your existing concrete surface so that the new sealer doesn’t adhere too well to old material on top of it. Be careful not to damage any plants nearby when using this tool near walkways! A broom attachment also works well for smaller areas where no plants grow yet–just be sure there aren’t any cracks present before beginning work here either since they’ll show up much more clearly without grass covering them up!
Residential-driveway-sealing-get-the-most-out-of-it

Conclusion

If you’re ready to take the next step toward sealing your driveway, contact us today for our services! We’ll help you decide with our services, which type of sealer will work best for your needs and make sure that it gets done right.